2330B-P 3.1GPM 2500PSI 1725RPM 3/4″ SOLID SHAFT

$676.49

SKU: 5073 Category:

2330B-P 3.1GPM 2500PSI 1725RPM 3/4″ SOLI

Hypro’s Powerline PLUS pumps with “cartridge technology.” Allows you to easily perform preventive maintenance on the crankcase oil seals and wet end oil seals by removing only the pump head. To make the whole operation easier, the Power Plus pumps are designed to be serviced with three basic tools, a standard screw driver, an allen wrench, and pliers.

Patent pending plunger guide cartridge improves guiding surface, allows oil seal to be serviced by removing only the head, and aligns plunger with oil seal, packing glands, and head for straighter and smoother operation.

Technical Notes

SPECIFICATIONS:

Triplex Pump with Rail Mounting Kit

Maximum Flow: 3.1 GPM

Maximum Pressure: 2500 PSI

Maximum Pump Speed: 1725 RPM

Minimum Horsepower Requirements: 5.5 bhp (7.0 hp for gas engines)

Shaft Diameter: 3/4″ OD solid

Crankcase Capacity: 14 oz. use SAE 30 weight oil

Inlet Port: 1/2″ FPT

Outlet Port: 3/8″ FPT

Weight: 19 lbs.

Lubrication: fill crankcase with SAE 30 weight oil per pump specifications. Change oil after every 500 hours of operation.

Hypro Corporation as manufacturer, warrants to the original purchaser, each new pump or other product for a period of one year from the date of shipment from the factory, to be free from defects in material and workmanship under normal use and service. “Normal use and service” means not in excess of recommended maximum speeds, pressures, and temperatures or handling fluids not compatible with component materials, as noted in applicable HYPRO product catalogs, technical literature, and instructions. This warranty shall not apply to any pump or other product which shall have been repaired or altered to adversely affect the performance or reliability of the pump or other product. Neither this warranty nor any implied warranty apply to damage or harm caused by any or all of the following: (1) freight damage; (2) freezing damage;(3) Damage caused by parts and/or accessories or components not obtained or approved by HYPRO; (4) ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES, OTHER THAN INJURY TO THE PERSON, ARISING FROM USE OF ANY PUMP OR OTHER PRODUCT MANUFACTURED BY HYPRO EXCEPT, in states that do not allow the exclusion or limitation of incidental or consequential damages; (5) Damages due to misapplication and/or misuse, except on products specified for acid application, the use of a solution or fluid with a pH less than 7 could be a misapplication: (6) Normal wear of moving parts or components affected by the moving parts.

The liability of HYPRO under the foregoing warranty is limited to the repair or replacement at HYPRO’S option without charge for labor or materials of any parts upon return of the entire pump or other product or of the particular part to the HYPRO factory within the warranty period, at the sole expense of the purchaser, which part shall upon examination appear to HYPRO’s satisfaction to have been defective in material or workmanship.

The liability of HYPRO under any theory of recovery (except any express warranty where the remedy is set forth in the above paragraph) for loss, harm, or damage, shall be limited to the lesser of the actual loss, harm, or damage, or the purchase price of the involved pump or other product when sold by HYPRO to its customer.

HYPRO expressly warrants its pumps and other products as above stated. There are no other express warranties. Any implied warranties, including implied warranty of merchantability or other fitness for a particular purpose, are limited in duration to one year from the date of purchase by the original purchaser except in states that do not allow time limitations on implied warranties. There is no implied warranty of fitness for a particular purpose or merchantability when this product is put to an industrial, commercial, or rental use.

Weight 19.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in